Clinched is free on the App Store. 20 exams ready, every answer with its official source.
Get the app

Topic explainerFAA Part 107

How to Read a Sectional Chart for the Part 107 Test

Short answer

To answer Part 107 chart questions, find the airport, identify the airspace from the line style and color, convert the charted MSL altitudes to AGL by subtracting ground elevation, and read the airport data block for frequencies. Sectionals are 1:500,000 scale charts updated every 56 days, and since October 26, 2026 the test also shows slices of current charts that are not in the printed supplement.

By the Clinched editorial teamUpdated 6 min read7 sources

 in Clinched
FAA Part 107 in Clinched
FAA Part 107
 in Clinched

Every Part 107 chart question boils down to three moves. Find the airport or point, figure out what airspace is around it from the line style and color, and convert the charted altitudes from MSL to AGL. The rest is reading the airport’s data block correctly. Sectionals are drawn at 1:500,000 scale and reissued every 56 days, so whatever you learn on one transfers to all of them.1

The test center hands you the Airman Knowledge Testing Supplement (FAA-CT-8080-2H). Legend 1 is the sectional legend, and Figures 20 through 26 are sectional excerpts.3 Since October 26, 2026, you may also see a slice of a current sectional that isn’t in the supplement.2 More on that at the end.

Airspace lines and colors

Airspace questions are the most common chart questions, and the answer is almost always in the line.

What you see What it means
Solid blue lines with blue altitude numbers Class B1
Solid magenta lines with magenta altitude numbers Class C1
Dashed blue line Class D1
Dashed magenta line Class E surface area1
Fuzzy magenta band (vignette) Class E begins at 700 feet AGL inside it1
Fuzzy blue band (vignette) Class E begins at a floor other than 700 feet where it borders Class G1
No marking at all Class G up to the overlying Class E, normally 1,200 feet AGL1

Class A starts at 18,000 feet MSL and isn’t drawn on VFR charts at all.1 You’ll never fly a small drone there, but the test likes to remind you it exists.

Why this matters for a drone pilot is §107.41. You need prior ATC authorization to fly in Class B, C or D airspace or inside the surface area of Class E designated for an airport.5 Class E that starts at 700 or 1,200 feet AGL doesn’t touch a drone limited to 400 feet AGL, so the magenta and blue vignettes usually mean “no authorization needed down here.” The dashed magenta line is the one that catches people. It’s Class E, but it goes all the way to the ground, so you need authorization.

Reading the altitude numbers

Class B and Class C sectors carry stacked numbers in hundreds of feet MSL with the last two zeros dropped. A sector marked 70 over 30 runs from 3,000 feet MSL up to 7,000 feet MSL.1 SFC on the bottom means the sector starts at the surface. A Class C ceiling of “T” means the Class C goes up to the floor of the Class B above it.1 Class D ceilings sit in a dashed box, and a minus sign in front of the number means up to but not including that altitude.1

Typical shapes help you sanity check an answer. A Class C area usually has a 5 nautical mile core from the surface to 4,000 feet above the airport and a 10 nautical mile shelf starting no lower than 1,200 feet.4 Class D usually runs from the surface to 2,500 feet above the airport elevation.4 The chart shows the real numbers for each airport, so use the chart, not the typical value.

MSL versus AGL

This is the conversion people get wrong under time pressure. Airspace floors and ceilings, airport elevations and the bold obstacle numbers are all in feet MSL. Your 400 foot limit in §107.51 is AGL.5

Say you’re 6 miles from a Class C airport under a shelf marked 40 over 15, and the ground under you is about 700 feet MSL. The shelf floor is 1,500 feet MSL, which is about 800 feet above the ground. A drone at 400 feet AGL is well below the shelf, so you’re in whatever airspace sits underneath it, often Class E or G. Now move to a spot where the ground is 1,300 feet MSL. The same shelf floor is only 200 feet above you, and a 400 foot flight would put you inside Class C. Same chart, same shelf, different answer.

Ground elevation and terrain

Contour lines on sectionals are usually 500 feet apart, with intermediate lines in flatter country.1 Each quadrant of 30 minutes of latitude by 30 minutes of longitude carries a Maximum Elevation Figure (MEF), the big number with a small number beside it. A 2 next to a small 8 means 2,800 feet MSL, the highest terrain or obstacle in that box, rounded up.1 The test sometimes asks for the MEF directly.

Obstacles

Towers and other obstacles more than 200 feet AGL show up on sectionals.1 Next to each one, the top number is the height of the top in MSL and the number in parentheses below it is the height above the ground.1 “UC” means under construction or not yet verified.1 For a drone question, the AGL number in parentheses tells you how tall the thing actually is, and the MSL number lets you compare it to an airspace floor. Remember that §107.51 lets you fly higher than 400 feet AGL only within a 400 foot radius of a structure and no more than 400 feet above its top.5

The airport data block

Each airport has a small block of text next to its symbol. Airports with control towers are printed in blue, and the rest are magenta.1

  1. Name and identifierThe airport's official name, then its location identifier, such as MIV or GCN.
  2. CT and a frequencyCT means control tower, followed by its primary frequency. A star next to it means the tower is part-time.
  3. The circled CThe frequency right before a small C in a solid circle is the Common Traffic Advisory Frequency (CTAF).
  4. Elevation, lighting, lengthAirport elevation in feet MSL, then L if runway lights run sunset to sunrise, then the longest runway in hundreds of feet.
  5. UNICOMA separate frequency for the aeronautical advisory station, when the field has one.

Runway length is rounded to the nearest 100 feet using 70 as the rounding point, so 8,070 feet prints as 81 and 8,069 feet prints as 80.1 Frequencies and part-time tower hours are confirmed in the Chart Supplement, and the test supplement includes Chart Supplement legends and excerpts too.3

Special use airspace and routes

Prohibited, restricted and warning areas carry a P, R or W and a number. Military Operations Areas and alert areas appear in magenta.1 Military Training Routes are labeled IR or VR. A four digit number means no segment goes above 1,500 feet AGL, and three or fewer digits means at least one segment does.1 A test question might ask what IR313 is or why a route with four digits matters to a low flying drone. Those routes are wide, sometimes several miles on each side of the line.1

The new current chart questions

The FAA started adding questions with images from current sectional charts to the UAG test on October 26, 2026.2 Each one names the chart and its dates. One FAA sample shows MILLVILLE MUNI (MIV) on the Washington sectional and asks what airspace surrounds the field and whether ATC authorization is required. The correct answer is a Class E surface area, with authorization required.2 Another sample on the Las Vegas sectional asks what CTAF to use at GRAND CANYON NTL PARK (GCN) when the tower is closed, and the answer is 119.0.2

The FAA publishes those current charts on its VFR raster chart page.6 PSI lets you bring a plain handheld magnifying glass into the test, and for small chart print it helps.7

How to practice

Start with Legend 1 open beside a full sectional for an area you know. Then do the supplement figures, because the test still uses them, and finish with current charts from places you’ve never seen. If you can read a chart from an unfamiliar city in under a minute, you’re ready.

Chart work sits inside the 20% airspace slice of the test, and airspace rules tie directly to the regulations that make up 48%.7 The Part 107 test guide shows how the full test breaks down, and Part 107 airspace and LAANC covers what to do once you’ve identified the airspace. For the background on why current charts showed up on the test, see the Part 107 test changes.

Questions people ask

Are sectional chart altitudes in MSL or AGL?

Almost everything on a sectional is in feet above mean sea level (MSL), including airspace floors and ceilings, airport elevations and the bold obstacle heights. The one common exception is the obstacle height in parentheses, which is above ground level (AGL). To compare a charted altitude with your 400 foot AGL drone limit, subtract the ground elevation.

Do I get a sectional chart legend on the Part 107 test?

Yes. The testing center gives you the printed testing supplement FAA-CT-8080-2H, and Legend 1 in it is the sectional chart legend. You can flip to it during the test. Reading it fast matters, so practice with it before test day.

How do I find the CTAF on a sectional chart?

Look in the airport data block for the frequency followed by a small C inside a solid circle. At an airport with a part-time tower, marked by a star next to the tower frequency, the tower frequency usually becomes the CTAF when the tower is closed. Confirm in the Chart Supplement.

Sources

  1. Aeronautical Chart Users' Guide, effective 9 July 2026Federal Aviation Administration
  2. Airman Testing Community Advisory, September 2026 Special EditionFederal Aviation Administration
  3. Airman Knowledge Testing Supplement for Sport Pilot, Recreational Pilot, Remote Pilot, and Private Pilot (FAA-CT-8080-2H)Federal Aviation Administration
  4. Aeronautical Information Manual, Chapter 3, Section 2, Controlled AirspaceFederal Aviation Administration
  5. 14 CFR Part 107, Small Unmanned Aircraft SystemseCFR, National Archives
  6. VFR Raster ChartsFederal Aviation Administration
  7. Unmanned Aircraft General, Small (UAG) Applicant Information BulletinPSI Services

ClinchedFAA Part 107

Pass FAA Part 107 on the first try.

Practice questions written from the official sources, full practice tests in the real format and a plan that ends on your test date. Free to start.

 in Clinched
 in Clinched
 in Clinched
Get the appFree practice tests