Part 107 Airspace Classes and LAANC Authorization Explained
Short answer
Under 14 CFR 107.41 you need prior ATC authorization to fly in Class B, C or D airspace or in a Class E surface area, and nowhere else by class alone. LAANC gives near real-time approval at or below UAS Facility Map altitudes at 726 airports, and requests above those altitudes, up to 400 feet, go to further coordination at least 72 hours ahead.



You need prior authorization from air traffic control to fly a drone under Part 107 in exactly four places. Those are Class B, Class C and Class D airspace, and the surface area of Class E airspace designated for an airport.1 Everywhere else, the airspace class alone doesn’t require permission, though temporary flight restrictions, prohibited and restricted areas still can.1 Airspace is 20% of the Part 107 test, and these rules tie straight into the regulations section, which is 48%.7
The airspace classes from a drone’s point of view
The standard airspace descriptions are written for airplanes, so it helps to translate each one to what it means at 400 feet AGL and below.
| Class | Typical shape | Authorization needed under Part 107 |
|---|---|---|
| A | 18,000 feet MSL up to FL600, not shown on VFR charts6 | Not relevant to small drones |
| B | Surface to 10,000 feet MSL around the busiest airports, shaped like an upside down wedding cake5 | Yes, where it reaches down to your altitude1 |
| C | 5 NM core from the surface to 4,000 feet above the airport, 10 NM shelf starting no lower than 1,200 feet5 | Yes, in the core and anywhere the shelf floor is within your altitude1 |
| D | Surface to 2,500 feet above the airport elevation around towered airports5 | Yes1 |
| E surface area | Surface up to the overlying airspace at airports with weather reporting but no operating tower5 | Yes1 |
| E starting at 700 or 1,200 feet AGL | Transition areas and the general Class E overlay6 | No |
| G | Everything below Class E6 | No |
The “typical” shapes come from the Aeronautical Information Manual. Each airport’s real boundaries are on the sectional chart, so always read the chart.5
The Class E surface area trap
A common shortcut is “Class E starts at 700 or 1,200 feet, so drones can ignore it.” That’s true for the vignette areas. It’s not true for a Class E surface area, which goes to the ground and is drawn as a dashed magenta line.6 Section 107.41 names it specifically.1 An FAA sample question for the current chart format shows MILLVILLE MUNI (MIV) inside a Class E surface area and asks whether ATC authorization is required. The answer is yes.8
Part-time towers
Many Class C and D airports have towers that close at night. When the tower isn’t operating, the Class D usually becomes a Class E surface area, or Class E down to 700 feet AGL with Class G below it.5 The Chart Supplement tells you which.5 If it becomes a Class E surface area, you still need authorization. If it becomes Class G at your altitude, you don’t. The test likes this kind of question because the answer depends on reading one line of the airport entry.
How LAANC works
LAANC stands for Low Altitude Authorization and Notification Capability. It’s a system run with FAA-approved companies, called UAS Service Suppliers, whose apps send your request to the FAA and return an authorization, usually in near real time.2 The FAA lists 726 airports where LAANC is available.2
- Check the UAS Facility MapThe map breaks the airspace around each airport into grid squares, each with a maximum altitude the FAA can approve without extra review. A 0 means no automatic approval at any height.
- Open an approved LAANC appChoose the exact area, time and maximum altitude for the flight.
- Stay at or below the grid altitudeRequests at or below the map altitude can be approved in near real time, on the day you fly.
- Need more heightSubmit a further coordination request, up to 400 feet. An air traffic manager reviews it, so it must be in at least 72 hours before the start time.
- Keep the authorization handyFly only inside the approved area, altitude and time window, and follow any conditions written into it.
Further coordination is a Part 107 only feature. You can submit it up to 90 days ahead,2 and no later than 72 hours before the operation.3 Unless the authorization says so, you don’t have to call the tower before you fly.2
UAS Facility Maps are information, not permission. The FAA says plainly that the maps do not authorize anything. You still have to apply through LAANC or FAADroneZone.4
LAANC only grants the airspace authorization. It doesn’t check that your flight is otherwise legal, so you still check NOTAMs, weather and every other airspace restriction yourself.2
When LAANC isn’t an option
Some airports don’t offer LAANC, and some operations don’t fit it. For those, you apply for an airspace authorization in FAADroneZone. Those requests are processed manually at FAA service centers, and the FAA says processing has historically taken up to eight weeks.3 FAADroneZone handles both day and night authorization requests.3 If your operation needs a waiver as well as an airspace authorization, you apply for both through FAADroneZone.2
Other airspace rules that come up on the test
Controlled airspace isn’t the only restriction. A few others show up regularly.
- Prohibited and restricted areas. You need permission from the using or controlling agency to fly in them.1
- Temporary flight restrictions. Section 107.47 requires you to follow the TFR rules in §§91.137 through 91.145 and §99.7.1 TFRs are issued by NOTAM, so check before every flight.
- Airport traffic. Even in Class G, §107.43 says you can’t interfere with traffic patterns or operations at any airport, heliport or seaplane base.1
- Night flights. At night your drone needs anti-collision lights visible for at least 3 statute miles, and the same lighting rule applies during civil twilight.1
- Cloud and visibility minimums. Stay at least 500 feet below clouds and 2,000 feet horizontally from them, with at least 3 statute miles of flight visibility from the control station.1
How the test asks about airspace
Airspace questions on the UAG test usually combine a chart with a rule. You’ll be shown an airport or a point on a sectional and asked what airspace it’s in, what the floor or ceiling is, or whether you need authorization to fly there at a given altitude. The method is the same every time. Identify the class from the line style, convert the charted MSL numbers to AGL, then apply §107.41.
To practice the chart half of that, work through the sectional chart guide for Part 107. For how airspace fits into the whole exam, see the Part 107 test guide. Clinched practice questions on airspace quote the exact regulation or AIM paragraph under each answer, which makes this topic faster to lock in.
Questions people ask
Do I need LAANC to fly in Class G airspace?
No. Part 107 requires ATC authorization only for Class B, C and D airspace and for Class E surface areas designated for an airport. In Class G you still follow every other Part 107 rule, including the 400 foot limit and any temporary flight restrictions.
How far in advance can I request LAANC authorization?
Up to 90 days before the flight. Near real-time requests at or below the UAS Facility Map altitude are usually approved within moments. Further coordination requests above the map altitude, up to 400 feet, must be in at least 72 hours before the start time.
What if the airport I need isn't on LAANC?
Apply through FAADroneZone instead. Those requests are handled manually at FAA service centers, and the FAA says processing has historically taken up to eight weeks, so apply early.
Sources
- 14 CFR Part 107, Small Unmanned Aircraft SystemseCFR, National Archives
- UAS Data Exchange (LAANC)Federal Aviation Administration
- Part 107 Airspace AuthorizationsFederal Aviation Administration
- UAS Facility MapsFederal Aviation Administration
- Aeronautical Information Manual, Chapter 3, Section 2, Controlled AirspaceFederal Aviation Administration
- Aeronautical Chart Users' Guide, effective 9 July 2026Federal Aviation Administration
- Unmanned Aircraft General, Small (UAG) Applicant Information BulletinPSI Services
- Airman Testing Community Advisory, September 2026 Special EditionFederal Aviation Administration
ClinchedFAA Part 107
Pass FAA Part 107 on the first try.
Practice questions written from the official sources, full practice tests in the real format and a plan that ends on your test date. Free to start.





