Clinched is free on the App Store. 20 exams ready, every answer with its official source.
Get the app

Skilled tradesNorth American Technician Excellence

NATE certification exams, explained

NATE certification is a voluntary national credential for HVACR technicians from North American Technician Excellence. On the traditional path you pass the 50-question Core exam (1.5 hours) and one 100-question specialty exam (2.5 hours), and you need 70% on each, which is 35 and 70 correct answers. There's no single national fee because each testing organization sets its own price. Certification lasts two years and renews with 16 continuing education hours or a specialty retest.

In production · tap Notify me in the app

In productionReviewed November 8, 2026 against 10 official sources

NATE Certification at a glance

Core exam
50 questions, 1.5 hours, closed book2
Specialty exam
100 questions, 2.5 hours7
Passing score
70% on Core and installation or service specialties (35 of 50, 70 of 100)1
Other route
CHP-5, five 30-question exams in any order4
Cost
Set by each testing organization, so it varies1
Where you test
NATE testing organization or Live Online Proctoring at home6
Recommended experience
1 year for installation exams, 2 years for service exams1
Valid for
2 years, renew with 16 CEHs or a specialty retest7
Renewal fee (CEH route)
$30 for the first specialty, $5 for each added one8

What the Core and specialty exams cover

The traditional route to NATE certification is two exams. The Core exam tests what every technician needs no matter what equipment they work on, and a specialty exam tests one system family in depth.3 Every question traces back to a published outline called a KATE (Knowledge Areas of Technician Expertise), which NATE describes as a job task analysis built by industry experts.1 Download the KATE for each exam you plan to take before you buy a single study book. It lists the topics and the reference manuals the questions come from.

Core exam weights

NATE Core exam, share of questions
  • Safety18%
  • Tools10%
  • Basic construction8%
  • Using basic science10%
  • Achieving desired conditions14%
  • Temperature and humidity measurements14%
  • Basic electricity26%

Basic electricity is the biggest slice at 26%.2 That section goes past “check the voltage.” The KATE lists ladder schematics, field wiring and pictorial diagrams, single phase and three phase motors, and electrical symbols.2 Technicians who mostly install equipment and rarely troubleshoot controls tend to lose points here.

Three other areas catch experienced people off guard.

  • Using basic science (10%) includes real math. Fractions, decimals, transposing formulas, right triangles, areas and volumes all appear in the outline, along with Ohm’s law, series and parallel circuits, and gas laws.2
  • Taking temperature and humidity measurements (14%) leans on the psychrometric chart, wet bulb and dry bulb readings, sensible and latent heat, and enthalpy.2 If you haven’t plotted a point on a psych chart since trade school, practice it.
  • Basic construction (8%) covers plans and specifications, roofing, walls, floors, fenestration, girders and trusses, and chimneys.2 It’s a small share, but it’s material most techs never study.

Safety, at 18%, is broad rather than hard.2 Expect hazardous materials transport and documentation, confined spaces, brazing with oxygen and acetylene, nitrogen purging, ladders and electrical grounding.2

Choosing a specialty

Installation specialties are Air Conditioning, Air Distribution, Air to Air Heat Pump and Gas Heating (Air). Service specialties add Light Commercial Refrigeration, Commercial Refrigeration, Hydronics Gas, Hydronics Oil and Oil Heating (Air).3 Passing a service specialty also awards its installation counterpart, and passing Heat Pump awards Air Conditioning, so the service exam usually gives you more for one sitting.9 NATE’s Heat Pump Service and Installation certifications are also recognized by the U.S. Department of Energy under its Energy Skilled program.3

Pick the specialty that matches the equipment you touch every week. The NATE Core exam study guide breaks down how each specialty KATE splits installation, service, components and applied knowledge.

The CHP-5 route

NATE also offers the Certified HVAC Professional (CHP-5) pathway. You take five 30-question exams covering HVAC Fundamentals, Electrical and Controls, Comfort and Airflow, Installation, and Service.4 You can take them in any order and wait up to six months between exams.4 It ends in the same NATE certification and the same two-year renewal cycle.4 Technicians who’d rather study in smaller chunks while working full time often prefer it.

How the exams are timed and scored

The Core exam has 50 questions with a 1.5 hour limit, and it’s closed book.2 An installation or service specialty exam has 100 questions and a 2.5 hour limit.7 Results are pass or fail. For Core and the installation and service specialties you need 70%, which is 35 of 50 on Core and 70 of 100 on a specialty.1 The Senior Level Efficiency Analyst exam requires 75%.1

The Core KATE adds one detail most people skip. NATE set its passing scores through a formal study, and the passing score on different test forms may vary slightly to account for how hard each form is.2 Plan around 70% as a floor and aim to score in the mid 80s on practice material before you book.

Testing organizations give the exams on paper or on a computer.1 With a computer exam you see your result on screen as soon as you submit, and your myNATE account updates within 24 hours.1 Paper exams are mailed off for scoring, and NATE says to allow 2 to 3 weeks for results.1

If you fail, you get a score report in your account that shows your percentage in each topic area of the exam.1 Domains don’t have equal numbers of questions, so check the KATE weights before deciding where to spend your retake study time.1

Language and accommodations

The Core exam and three service specialties (Air Conditioning, Air to Air Heat Pump and Gas Heating) are available in Spanish.1 Translators can be requested through the non-standard accommodation form, but they can’t be used in a Live Online Proctoring session.1 Disability accommodations under the Americans with Disabilities Act have to be requested in writing at least 45 days before your test session.7

Eligibility, cost and booking

NATE has no formal education requirement.1 It does recommend one year of field experience before an installation exam, two years before a service exam, and five years before the senior level exam.1 The questions assume you’ve done the work, so treat those numbers as real guidance.

If you’re newer than that, NATE has two entry level certificates. Ready to Work is aimed at people just entering the field, and HVAC Support Technician is designed for techs with 6 to 12 months of experience.5 Both are certificates rather than NATE certification, and both are valid for five years.5 The NATE certification levels guide compares all of them side by side.

What it costs

There’s no single national price. Each testing organization sets its own exam fee and collects payment, and NATE tells candidates to call the location directly for pricing.1 Because testing organizations also set their own schedules, it’s worth calling two or three near you to compare dates and price. Live Online Proctoring is ordered and paid for through your myNATE account, and the price shows there.6

Two ways to sit the exam

  1. Decide on in person or onlineIn person means a NATE testing organization near you, on paper or on a computer. Online means a live remote proctor watching through your webcam.
  2. Book in person through a testing organizationUse the zip code search on natex.org to find one, then call to ask about session dates, paper or computer format, and the fee.
  3. Or order online through myNATECreate or log in to your myNATE account, open the Live Online Proctoring section, and pay for the exams you want.
  4. Schedule with Meazure LearningAfter payment you get an email link to pick a time on the ProctorU platform. Install the Guardian browser before test day.

For online testing, your computer needs at least 1 GB of RAM, a 2 Mbps upload and download connection, a webcam, speakers and a microphone.6 Chromebooks, tablets, iPads and second monitors aren’t permitted.6

NATE doesn’t replace EPA 608

NATE is voluntary. EPA Section 608 certification is a federal rule under 40 CFR Part 82, Subpart F, for technicians who maintain, service, repair or dispose of equipment that could release refrigerant.10 If you handle refrigerant, you need 608 whether or not you hold NATE. NATE is itself an EPA approved certifying organization and offers the 608 exams through Live Online Proctoring.6 Start with our EPA 608 exam guide if you don’t have your card yet.

A six week study plan

This plan assumes you have the recommended field time and can study about five hours a week. If you’re taking Core and a specialty on the same day, run the weeks in order. If you’re splitting them, finish weeks 1 to 3, pass Core, then do weeks 4 to 6.

  1. Week 1Download the Core KATE and your specialty KATE. Read every line and mark each topic as strong, shaky or never seen. Start with basic electricity, since it's a quarter of Core.
  2. Week 2Electrical theory and diagrams. Ohm's law, series and parallel circuits, reading ladder schematics for sequence of operation, motor types and capacitors. Draw a furnace or condenser ladder diagram from memory.
  3. Week 3Measurements, science and construction. Psychrometric chart plots, wet bulb and dry bulb, latent and sensible heat, gas laws, and the math topics from the KATE. Skim the construction and safety items you marked shaky.
  4. Week 4Specialty system knowledge. Work through components and sequence of operation for your equipment family, then installation practices from the reference manuals the KATE lists.
  5. Week 5Specialty service and diagnostics. Superheat and subcooling, airflow, combustion or refrigerant circuit troubleshooting, depending on your specialty. Time yourself on 100-question practice sets.
  6. Week 6Full timed practice. Take a 50-question set in 90 minutes and a 100-question set in 2.5 hours. Review every miss against the KATE topic it belongs to, then book.

Most of the reference books the KATEs cite are the ACCA manuals (D, J, S, T and QI), SMACNA duct standards, the International Mechanical and Fuel Gas Codes, and generally accepted HVACR textbooks.2 You don’t need to own all of them. A good HVACR textbook plus the ACCA manuals for your specialty covers most of it.

Clinched is building a NATE course now. Tap “Notify me” on the NATE card in the app and we’ll tell you when it’s ready.

Test day

For an in-person session, NATE suggests arriving at least 30 minutes early.1 You need a photo ID, and the proctor won’t let you test without one.7 You can bring a non-programmable calculator, and your phone and other electronics go into a storage area the proctor sets up.7 Before you start, you sign the NATE Code of Conduct, and at the end you sign an agreement on your answer card that you won’t discuss the exam.7

Live Online Proctoring is stricter about your room. Your ID has to be current, government issued, and carry a signature.6 The proctor has you pan your webcam 360 degrees around the room, under the desk and behind the monitor, and show your screen in a mirror or phone camera.6 You get the calculator built into the exam software, not a handheld one, plus two blank sheets of scratch paper.6 Restroom breaks aren’t permitted, and leaving your seat ends the session and forfeits the fee.6

  • Government photo ID (with a signature for online testing)
  • Non-programmable calculator for in-person sessions
  • Several No. 2 pencils if you're testing on paper
  • Guardian browser installed and tested a day early for online sessions
  • Clear desk, private room, phone stored after the room scan
  • Arrive or log in 30 minutes before your start time

If you sit for Core and a specialty on the same day, you can take a short break between them.7 Online, the exam submits itself when the timer runs out.6

After you pass, or if you don’t

When you pass, NATE emails a digital badge through BadgeCert, and you download your certificate and wallet card as PDFs from it.1 Anyone can confirm your status with the Verify a NATE ID tool on natex.org.1

Certification lasts two years.1 You renew one of two ways.7

Renewal method What you do Cost
Continuing education Log 16 hours of approved training during your two-year period, then pay the renewal fee $30 for the first specialty, $5 for each added one8
Retest Retake only your specialty exam before it expires Whatever your testing organization charges8

Training counts hour for hour, so a four-hour class earns 4 continuing education hours (CEHs).9 Courses from NATE-recognized training providers post to your account automatically, and you upload proof for anything else, such as a state license class or OSHA training.9 Training has to relate to your specialty or cover general areas like safety, electrical, controls and codes.9 You can renew once you’re within one year of your expiration date.8

The grace period is in NATE’s renewal rules, and so is the full restart once it ends.9

If you don’t pass, the exam you did pass still counts. A Core pass without a specialty, or a specialty pass without Core, stays good for two years.7 NATE’s candidate handbook doesn’t set a waiting period between attempts, so you can buy another exam and book again once you’ve worked on the weak areas in your score report.7 Ask your testing organization about their retest fee before you go back. Veterans should check with the VA, since it pays a testing stipend and failed tests are also eligible for payment.7

Questions people ask

How many questions are on the NATE Core exam?

The NATE Core exam has 50 questions and a 1.5 hour time limit, and it's closed book. You need 70%, which means 35 correct answers, to pass. The specialty exam you pair it with has 100 questions and a 2.5 hour limit.

What score do you need to pass NATE?

NATE exams are pass or fail. The Core exam and the installation and service specialty exams require 70%, so 35 of 50 on Core and 70 of 100 on a specialty. The Senior Level Efficiency Analyst exam requires 75%.

How much does NATE certification cost?

NATE doesn't publish one national exam price. Each testing organization sets its own fee and collects payment, so you have to call the location you plan to use. If you test from home through Live Online Proctoring, the price appears when you order the exam in your myNATE account.

Can you take the NATE exam online?

Yes. NATE offers Live Online Proctoring for its certification exams through Meazure Learning, and you order it from your myNATE account. You need a desktop or laptop with a webcam and microphone, a private room and a government photo ID with a signature. Tablets and Chromebooks aren't allowed.

How long does NATE certification last?

NATE certification lasts two years. To renew, you either log 16 continuing education hours and pay the renewal fee, or retake your specialty exam before it expires. There's a 120 day grace period after expiration, and after that you have to pass Core and a specialty again.

Is NATE certification the same as EPA 608?

No. EPA Section 608 certification is a federal requirement for anyone who maintains, services, repairs or disposes of equipment that could release refrigerant. NATE is a voluntary industry credential. Most technicians who handle refrigerant need both.

Sources

  1. Frequently Asked QuestionsNorth American Technician Excellence
  2. Core Exam KATE (Knowledge Areas of Technician Expertise)North American Technician Excellence
  3. Traditional PathwayNorth American Technician Excellence
  4. Certified HVAC Professional (CHP-5)North American Technician Excellence
  5. NATE Entry Level CertificatesNorth American Technician Excellence
  6. Live Online ProctoringNorth American Technician Excellence
  7. Candidate HandbookNorth American Technician Excellence
  8. Policies and FeesNorth American Technician Excellence
  9. NATE Recertification GuideNorth American Technician Excellence
  10. Section 608 Technician CertificationU.S. Environmental Protection Agency

Other skilled trades exams

Free on the App Store

Your exam, in your pocket.

20 exams ready with questions written from the official sources, timed practice tests in the real format and a readiness score with a pass line.

On your computer?
Scan with your iPhone camera to get Clinched practice in the app.

 in Clinched
 in Clinched
 in Clinched
Get the appFree practice tests