Topic explainerCDL Air Brakes and Combination
CDL Air Brake Restrictions L and Z, and How to Remove Them
Short answer
The L restriction bars you from any commercial vehicle with air brakes. You get it by failing the air brakes knowledge test or by taking the skills test in a vehicle without air brakes. The Z restriction bars full air brakes and comes from testing in an air over hydraulic vehicle. To remove either one, you pass the air brakes knowledge test and a shorter skills test that includes the air brake pre-trip check.



An L on your CLP or CDL means you can’t drive any commercial vehicle with air brakes. A Z means you can’t drive one with full air brakes. Both come from 49 CFR 383.95, and both can be removed later without starting your license over.1 Restrictions are easy to pick up by accident, though, and for a new Class A driver an L can stall training completely.
The two air brake codes
Federal rules standardize the restriction letters on every state’s CLP and CDL. L stands for “No air brake equipped CMV” and Z stands for “No full air brake equipped CMV.”2 Here’s how each one gets onto a license.
| Code | Meaning | How you get it | Appears on |
|---|---|---|---|
| L | No commercial vehicle with any type of air brakes | Fail the air brake knowledge test, or take the skills test in a vehicle without air brakes | CLP and CDL |
| Z | No commercial vehicle with full air brakes | Take the skills test in a vehicle with air over hydraulic brakes | CDL only |
The definitions are broad on purpose. For the L restriction, air brakes include any braking system that works fully or partly on the air brake principle.1 So L keeps you out of air over hydraulic trucks as well as full air rigs. Air over hydraulic means a system that works partly on air and partly on hydraulic pressure.1
That’s also why New York tells anyone whose vehicle has air brakes, “including air-over hydraulic brakes,” to take the Air Brakes knowledge test.7 Testing in an air over hydraulic vehicle still requires the air brake knowledge, but it only proves you can handle that partial system on the road, so you get Z instead of L.
California’s list of codes matches the federal one and notes which codes can appear on a permit. L can appear on both, while Z appears on the CDL only.6 That’s because Z is tied to the skills test, and you don’t take a skills test to get a permit.
How people end up with an L
There are two routes, and both are common.1
The first is failing the air brakes knowledge test while passing everything else. If the state issues your permit anyway, it must mark it with the restriction, and federal rules list L among the codes allowed on a CLP.2 For a Class B dump truck driver testing in a hydraulic brake truck, that may not matter. For a Class A trainee it usually does, because most tractor-trailers use air brakes and a permit with L doesn’t allow training in one.
The second route is taking the skills test in a vehicle that has no air brakes. Some drivers do this deliberately because their employer’s trucks have hydraulic brakes and the test vehicle was easy to get. That’s fine if you’ll stay in that kind of truck. It becomes a problem the day you want to drive a truck with air brakes, because the restriction stays until you remove it.
If you’re still at the permit stage, the cleanest fix is simply to retake the air brakes knowledge test before you test on the road. Our guide to passing the CDL air brakes test covers what’s on it.
The Z restriction and the other equipment codes
The Z restriction, along with E (no manual transmission) and O (no tractor-trailer connected by a fifth wheel), applies only to drivers who took skills tests on or after July 8, 2015. Drivers licensed before that weren’t retested to add them.2 All three work the same way. They record what kind of vehicle you proved you could drive.
| Code | Restriction | Trigger |
|---|---|---|
| E | No manual transmission CMV | Skills test in a vehicle with an automatic transmission |
| O | No tractor-trailer CMV | Class A skills test with a pintle hook or other non-fifth wheel connection |
| M | No Class A passenger vehicle | Passenger skills test in a Class B bus |
| N | No Class A and B passenger vehicle | Passenger skills test in a Class C bus |
| K | Intrastate only | Driver qualified for intrastate driving only |
| V | Medical variance | State notified of a medical variance |
Both tables follow 49 CFR 383.95 and 383.153.12 Note that the letter N means a passenger restriction here, while N as an endorsement means tank vehicle. They sit in different places on the license.
How to remove L or Z
Removing an air brake restriction is a smaller job than the original license. You don’t retake the whole skills test. Under 49 CFR 383.135(b)(7), the state may give a modified skills test that shows you can safely operate the vehicle’s full air brakes or air over hydraulic brakes. To remove the L or Z, you must also perform the air brake pre-trip inspection and pass the air brake knowledge test.3
- Study Section 5 of your state's CDL manualThe air brake knowledge test is the same one new applicants take. Pennsylvania lists it at 25 questions for restriction removal.
- Pass the air brake knowledge testYou need at least 80% under federal rules.
- Get a permit if your state requires oneCalifornia applies its 14 day permit waiting period to restriction changes that require a skills test.
- Arrange a vehicle with air brakesFor a Z removal you need full air brakes, not air over hydraulic. For an L removal, the vehicle you test in decides whether you end up with no restriction or a Z.
- Take the modified skills testIt includes the air brake pre-trip check and a demonstration that you can operate the brakes safely.
The 25 question figure and the air brake test vehicle come from Pennsylvania’s fact sheet, and the 14 day wait comes from California’s testing standards.56 The 80% passing score is federal.3
You don’t need entry level driver training for this. The federal training rule exempts drivers applying to remove a restriction under 383.135(b)(7), and Pennsylvania’s fact sheet marks training as not required for L/Z removal.45 Fees for the knowledge test, skills test and a new license document vary by state, so check your licensing agency before you book.
One trap to avoid. If you remove an L by testing in an air over hydraulic truck, you’ll likely trade it for a Z. Test in a full air brake vehicle if you want a clean license.
Should you just take the air brakes test up front
For almost every new commercial driver, yes. The knowledge test is one more short test on the day you apply for your permit, and New York’s manual already assigns Section 5 reading to Class A applicants studying for the combination test.7 Passing it keeps your options open, while removing an L later means another trip to the licensing office, another test fee and, in some states, another permit and waiting period.
If you’re working toward a Class A, the air brakes and combination guide explains how the two tests fit together, and the CDL general knowledge guide covers the test everyone takes first. Clinched has practice for the CDL knowledge tests, air brakes included.
Questions people ask
What does the L restriction mean on a CDL?
L means you may not drive a commercial vehicle equipped with any type of air brakes. Federal rules count any system that works fully or partly on air as air brakes, so it also covers air over hydraulic systems. It can appear on a commercial learner's permit as well as a CDL.
What does the Z restriction mean on a CDL, and how is it different from L?
L bars every air brake vehicle and comes from failing the air brakes knowledge test or taking the skills test in a vehicle without air brakes. Z bars only full air brake vehicles and comes from taking the skills test in a vehicle with air over hydraulic brakes. Z appears on the CDL only, never on a permit.
How do I remove an air brake restriction from my CDL?
Under 49 CFR 383.135(b)(7) you pass the air brakes knowledge test, perform the air brake pre-trip inspection, and pass a modified skills test in a vehicle with the right brakes. You don't have to retake the full skills test. Your state may require a permit and a 14 day wait first, as California does.
Do I need entry level driver training to remove an air brake restriction?
No. 49 CFR 380.603 exempts drivers who are only removing a restriction under 383.135(b)(7) from the entry level driver training rules. Pennsylvania's CDL fact sheet also lists no training requirement for removing the L or Z restriction.
Sources
- 49 CFR 383.95, RestrictionseCFR, Office of the Federal Register
- 49 CFR 383.153, Information on the CLP and CDL documents and applicationseCFR, Office of the Federal Register
- 49 CFR 383.135, Passing knowledge and skills testseCFR, Office of the Federal Register
- 49 CFR 380.603, Entry level driver training applicabilityeCFR, Office of the Federal Register
- Commercial Driver's License Fact SheetPennsylvania Department of Transportation
- Commercial Driver License Testing and Commercial Learner's Permit StandardsCalifornia Department of Motor Vehicles
- Commercial Driver's Manual CDL-10, Section 1 IntroductionNew York State Department of Motor Vehicles
ClinchedCDL Air Brakes and Combination
Pass CDL Air Brakes and Combination on the first try.
Practice questions written from the official sources, full practice tests in the real format and a plan that ends on your test date. Free to start.





