# The journeyman electrician exam, explained

> The journeyman electrician exam is a state or local licensing test built on the National Electrical Code (NFPA 70), so the format depends on where you work. Texas gives two PSI portions (59 knowledge items in 130 minutes and 26 calculation items in 110 minutes) for $78, California's General Electrician exam is 100 questions in 4 hours 30 minutes for $175 including the application fee, and Texas, California and Colorado all require 70% to pass. Most candidates qualify after about 8,000 hours of supervised work, then pass by learning to find answers in the code book fast, drilling load and fill calculations, and studying the exact NEC edition their exam names.

Source page: https://clinchedprep.com/exams/journeyman-electrician/
Last reviewed: 2026-11-08

## Key facts

- Who issues it: A state board in most states, cities or counties in states like Florida
- Code basis: National Electrical Code (NFPA 70), in the edition your exam names
- Texas format: Two portions, 59 knowledge items in 130 min and 26 calculation items in 110 min
- California format: 100 questions in 4 hours 30 minutes, references provided on screen
- Colorado format: 90 scored items in 240 minutes, code book provided
- Passing score: 70% in Texas, California and Colorado, at least 75% for Florida local licenses
- Experience: 8,000 hours in Texas and California, 12,000 hours or an apprenticeship in Florida
- Exam fees: $78 in Texas, $175 in California including application, $78 in Colorado

## What the exam covers

Every journeyman exam in the country is built on the National Electrical Code, published by the National Fire Protection Association as NFPA 70. States and cities adopt a specific edition, and NFPA keeps a map of which edition is enforced where.[9] The questions ask you to apply that code to real installations, plus a slice of electrical theory and calculations. Business and lien law questions mostly belong to the master or contractor exam, though some states add a few on their own licensing rules.

California publishes the cleanest breakdown. Its General Electrician exam weights the four areas like this.[4]

title: California General Electrician exam, percent of questions
Installation: 66
Determination of electrical system requirements: 22
Safety: 6
Maintenance and repair: 6


Texas lists item counts instead, and the split tells you where to spend your time. In the NEC Knowledge portion, branch circuits and conductors, wiring methods and materials, and equipment and devices get 10 items each. Services get 6, special occupancies 6, motors and generators 5, feeders 3, definitions and plan reading 3, renewable energy 2, and disconnecting means 1.[2] The Calculations portion leans on service and feeder loads, branch circuit sizing, motors and special occupancies.[2]

### The articles that do the heavy lifting

You can't memorize the NEC, and nobody expects you to. You need to know which article owns which topic so you can get to the right page in under a minute. A short map, using 2023 edition numbering:

| Topic | Where it lives |
|---|---|
| Definitions | Article 100 (all definitions were gathered here in 2023) |
| GFCI and AFCI protection | 210.8 and 210.12 |
| Dwelling and commercial load calculations | Article 220 |
| Services | Article 230 |
| Overcurrent protection | Article 240 |
| Grounding and bonding | Article 250 |
| Conductor ampacity, correction and adjustment | 310.15 and Table 310.16 |
| Box fill | 314.16 |
| Motors, including full load current tables | Article 430 |
| Pools, spas and fountains | Article 680 |
| Solar photovoltaic systems | Article 690 |
| Conduit fill | Chapter 9 tables and Informative Annex C |

The 2026 edition moved and renumbered some material, so if your exam uses 2026, build this map again from your own book.

### What trips people up

Motor questions catch a lot of people. For sizing conductors and most protection, the NEC sends you to the full load current tables in Article 430, not the nameplate. Ampacity questions trip people who forget to apply both the temperature correction factor and the adjustment for more than three current-carrying conductors. Box fill and conduit fill look like easy arithmetic, but each one has a counting rule that changes the answer. Definitions matter more than people expect, because a question about a "dwelling unit" or a "feeder" turns on the exact meaning. Texas also tells you to treat every conductor as copper unless the question says otherwise.[2]

## How the exam works

The format depends entirely on your state. Here are three states with published bulletins for 2026.

| | Texas (PSI) | California (Pearson VUE) | Colorado (PSI) |
|---|---|---|---|
| Questions | 59 knowledge + 26 calculations, including 5 unscored | 100 | 90 scored + up to 10 unscored |
| Time | 130 min + 110 min | 4 hr 30 min | 240 min + 30 min for unscored items |
| Passing score | 70% on each portion | 70% | 70% (63 items) |
| Code book | Your own soft-bound NEC 2026 | NEC 2023 on screen | NEC 2026 provided |
| Calculator | Your own non-programmable | On-screen | On-screen |

Sources for the table are the Texas, California and Colorado bulletins.[2][4][7]

### Texas splits the exam in two

Since March 11, 2025, the Texas journeyman exam has two separate parts, a knowledge portion and a calculations portion.[1] You have to pass each one with 70%, and unused time on the first portion doesn't carry over to the second.[2] Your own NEC is allowed, but it has to be a soft-bound edition. Spiral, ring and loose-leaf copies are out, and so is the NEC Handbook.[2] You can highlight, underline and write notes in the book before test day, and you can use permanent tabs made by the publisher. Homemade tabs are not allowed, and you can't mark the book during the exam.[2]

### California and Colorado hand you the book

California candidates get the NEC, NFPA 70E and the Cal/OSHA construction pocket guide as on-screen PDFs with a search box.[4] You can't bring any reference of your own. Colorado provides a printed 2026 NEC and a formula page at the test center, and you can't write in, highlight or index it.[7] When the book is provided, you lose your own tabs and notes, so your speed comes from knowing the article layout cold.

Every one of these exams is computer based, multiple choice, and scored right after you finish.[2][4][7] A wrong answer and a blank both score zero, so never leave a question empty.[7]

## Eligibility, cost and scheduling

You don't book the exam first. You apply to the licensing agency, it checks your hours, and then it clears you to schedule with the vendor.

**Texas.** You need at least 7,000 hours of on-the-job training under a Texas Master Electrician to apply and sit for the exam, and 8,000 hours before the license is issued.[3] The first application goes by mail to the Texas Department of Licensing and Regulation (TDLR) with a $30 nonrefundable fee.[3] The PSI exam fee is $78 for both portions, and a retake of one or both portions is another $78.[2] You have one year from the date TDLR receives your application to meet every requirement, including passing.[1]

**California.** General Electrician certification requires 8,000 hours of work for a C-10 electrical contractor on systems covered by the NEC.[6] The fee is $175, made up of a $100 exam fee and a $75 administration fee, and it isn't refundable.[5] The testing vendor changed in 2026. PSI stopped giving these exams on June 1, 2026, and the Division of Labor Standards Enforcement (DLSE) now runs them through CPS HR Consulting, with scheduling through Pearson VUE.[4] You have one year from your eligibility notice to test.[4]

**Colorado.** PSI charges $78 for the exam and $73 for a retest, and the fee is valid for a year from payment.[7] You file the license application with the state after you pass.[7]

**Florida.** There's no statewide journeyman license. State law lets counties and cities issue one to people who score at least 75% on a proctored exam and have finished a registered apprenticeship or at least 12,000 hours of on-the-job training, plus Florida Building Commission coursework.[8] Fees, vendors and code editions are set locally, so call your county's licensing office.

Many other states license journeymen through a state board, and some leave it to cities. For a closer look at how requirements differ, read [journeyman electrician license requirements by state](/blog/journeyman-electrician-license-by-state/). Confirm everything with your own board before you pay.

## A 10 week study plan

This plan assumes you work full time and can give it 6 to 8 hours a week. If your exam lets you bring your own book, buy the exact edition it names now and add the publisher's tabs in week 1.

Week 1: Read your state's candidate bulletin twice. Get the right NEC edition. Read Article 90 and skim every chapter's table of contents so you know the order of the book.
Week 2: Definitions in Article 100 and the general requirements in Article 110, including working space. Practice looking up 20 terms against a timer.
Week 3: Branch circuits, feeders and services. GFCI and AFCI locations for dwellings are a favorite question topic.
Week 4: Overcurrent protection and grounding and bonding. Draw a service from the utility to a subpanel and label every grounding and bonding conductor.
Week 5: Conductors and ampacity. Work 30 problems that need both temperature correction and adjustment factors.
Week 6: Wiring methods, box fill and conduit fill. Count conductors by the code's rules, not by eye.
Week 7: Motors and transformers. Size conductors, overloads and short circuit protection from the full load current tables.
Week 8: Dwelling load calculations by the standard and optional methods, then commercial loads. Special occupancies, pools and solar.
Week 9: Two full timed practice exams in your state's format. Log every miss by article.
Week 10: Rework the two weakest articles from your log, then one last timed exam. Light review only the day before.


Timing is the part most people underprepare for. Texas gives you 130 minutes for 59 items, which is a little over two minutes each.[2] That's enough if you go to the right article first try, and not nearly enough if you start every search in the index. Our post on [using the NEC code book on an open book exam](/blog/nec-code-book-exam-tips/) covers lookup tactics in detail.

Clinched is building a journeyman electrician course. If you want to hear when it's ready, tap "Notify me" on the exam in the app.

## Test day

Arrive 30 minutes before your appointment. In Texas, a late arrival means you won't be admitted and you lose the fee.[2] Pearson VUE in California says the same thing.[4]

Valid government photo ID with your signature, with your name exactly as the board has it on file
A second signed ID if you test in California
Your soft-bound NEC in the edition your exam names, publisher tabs only, if your state lets you bring it
A silent, battery powered, non-programmable calculator with no alphabet keys, if your state allows your own
Your confirmation email with the test center address


Texas requires one valid government ID with your photo, signature and date of birth, and it must match TDLR's records.[2] California requires two original IDs, one government issued with photo and signature.[4] Phones, smart watches, bags and coats go in a locker. In California you get no scheduled breaks, and if you leave for the restroom the clock keeps running.[4]

PSI starts you with a tutorial and sample questions, and up to 15 minutes of it doesn't count against your exam time.[2] Pearson VUE posts a demo of its testing screen online that you can try before test day.[4] You can go back and change any answer until time runs out.[2] When you submit, your score shows on screen, and if you fail you get a diagnostic report showing your weak areas.[2]

## After you pass, or if you don't

**If you pass.** In California, your score report counts as proof of certification until the card arrives by mail within about two weeks.[4] California certifications renew every 3 years with 32 hours of continuing education from an approved provider.[4] In Texas, the journeyman license is valid for one year and renews annually.[3] If you tested at 7,000 hours, TDLR won't issue the license until you reach 8,000.[3]

**If you don't.** Texas lets you retake as many times as you need, but each attempt costs another fee.[1] The retake fee is $78 whether you failed one portion or both.[2] California makes you wait 60 days from your exam date before you send in a retest application and another exam fee.[4] Colorado's retest fee is $73.[7]

Use the diagnostic report. It breaks your result down by content area, which tells you which articles to rework. Then look honestly at your pacing. If you ran short on time, practice timed sections before the retake, because more reading won't fix a lookup speed problem.

## Which NEC edition your exam uses

This is the most common avoidable mistake on the journeyman exam. The NEC is revised every three years, and states adopt new editions on their own schedule.[9] Studying from the wrong book costs points, because section numbers move and requirements change between editions.

Several exams switched in 2026. Texas exams have been referenced to the 2026 NEC since September 1, 2026.[2] Colorado moved to the 2026 NEC on August 1, 2026, and will provide the 2023 book on request only until December 1, 2026.[7] California's September 2026 bulletin still lists the 2023 NEC.[4] Florida jurisdictions each set their own edition.

Before you buy a code book or a prep course, open your state's current candidate bulletin and find the reference list. It names the exact NEC edition and whether you can bring your own copy. Study from that edition only.


If you aren't ready to buy the book yet, NFPA offers free read-only access to its codes online, including NFPA 70.[10] It's fine for reading. For timed practice, use the physical or on-screen format you'll actually have on test day.

## FAQ

### How many questions are on the journeyman electrician exam?
It depends on the state. Texas splits the exam into a 59 item NEC knowledge portion and a 26 item calculations portion, California's General Electrician exam has 100 questions, and Colorado's Journeyman Wireman exam has 90 scored items plus up to 10 unscored ones. Check the candidate bulletin for your state before you study.

### Is the journeyman electrician exam open book?
Almost always, but the rules differ. Texas lets you bring your own soft-bound NEC with publisher tabs and notes added before test day. California and Colorado provide the code book at the test center and you can't mark it or bring your own.

### What score do you need to pass the journeyman electrician exam?
Texas, California and Colorado all set the pass mark at 70%. In Texas you must score 70% on each of the two portions separately. Florida law requires at least 75% on the proctored exam for a county or city journeyman license.

### How many hours do you need to take the journeyman electrician exam?
Texas lets you apply and test at 7,000 hours of supervised work and issues the license at 8,000 hours. California requires 8,000 hours for General Electrician certification. Florida's local licenses require a registered apprenticeship or at least 12,000 hours of on-the-job training.

### What happens if I fail the journeyman electrician exam?
You can retest, but the waits and fees vary. Texas charges $78 to retake either or both portions. California makes you wait 60 days from your exam date before you send in a retest application and another exam fee.


## Sources

1. Electricians Examination Information, Texas Department of Licensing and Regulation. https://www.tdlr.texas.gov/electricians/elecexam.htm
2. TDLR Electrician Candidate Information Bulletin, PSI Services LLC. https://test-takers.psiexams.com/api/content/bulletin/1682
3. Apply for a New Journeyman Electrician License, Texas Department of Licensing and Regulation. https://www.tdlr.texas.gov/electricians/apply/individuals/journeyman-electrician.htm
4. Electrical Certification Candidate Information Bulletin (September 2026), California Division of Labor Standards Enforcement and CPS HR Consulting. https://www.pearsonvue.com/content/dam/VUE/vue/en/documents/clients/ecu/candidate-info-bulletin.pdf
5. Electrician Certification FAQs, California Department of Industrial Relations. https://www.dir.ca.gov/dlse/ecu/ecu_faq.htm
6. General Electrician Experience Requirements, California Department of Industrial Relations. https://www.dir.ca.gov/dlse/ecu/1a.html
7. Colorado State Electrical Board Candidate Information Bulletin, PSI Services LLC. https://test-takers.psiexams.com/api/content/bulletin/3395
8. Florida Statutes 489.5335, Journeyman Reciprocity, The Florida Senate. https://www.flsenate.gov/Laws/Statutes/2025/489.5335
9. NEC Enforcement Maps, National Fire Protection Association. https://www.nfpa.org/education-and-research/electrical/nec-enforcement-maps
10. Free Access to NFPA Codes and Standards, National Fire Protection Association. https://www.nfpa.org/freeaccess
